40 Years of Challenging Product Development and Brand Establishment: A Conversation Between Victor and KENWOOD Product Designers
In preparation for the 20th anniversary of the business integration in October 2028, JVCKENWOOD has launched its anniversary activities, "JVCKENWOOD Anniversary." In this article, we present a dialogue between Masahiro Takamoto and Katsumi Takeda, both product designers with 40-year careers, to decipher the design philosophy and evolution that has been accumulated over the years at this milestone.
Takamoto and Takeda, who joined Victor Company of Japan, Ltd. and Kenwood Corporation respectively in 1986 (the predecessors of JVC Kenwood), have worked on product development that has shaped the brand's history while experiencing the evolving landscape of product design. Looking back at their design stories, we explore the roots of the brand's enduring identity.
Looking back on my 40-year career as a product designer.
I understand that you both joined the company in 1986. Could you tell us what led you to aspire to become product designers at that time?
Takamoto During my student days, I majored in Industrial Design in the Department of Industrial Design at Kanazawa College of Art. Back then, many design students went on to become car or home appliance designers after graduation. I wasn't particularly interested in cars at the time, so in my third year of university, I visited a home appliance manufacturer in the Tokyo metropolitan area and thought that pursuing a career in home appliance design seemed interesting. Later, a professor at my university told me about a job opening at Victor Company of Japan (JVC), and after participating in a two-week internship, I was able to receive a job offer.

Takeda I was attending Tokyo Zokei University, and since I'd always loved audio equipment, I was looking into various consumer electronics manufacturers as potential employers. It was the year Kenwood changed its name from Trio, and their corporate identity (CI) design was a huge success and was generating a lot of buzz. Their product designs were cool, and their catalogs were fantastic. I contacted a senior from my university who worked at Kenwood, talked to them, and then decided to take their entrance exam.

What kind of changes have you experienced as a designer throughout your long career, from joining the company to the present?
Takamoto At the time, Victor offered a full range of consumer electronics products, and its three main businesses were audio, television, and video, which were collectively known internally as "Otebi." When I joined the company, I was put in charge of designing video cameras, which were just starting to flourish as a new product category. After that, I rotated through different projects every few years. I gained experience in every category except television, including VCRs, portable audio players, boomboxes, MD component systems, and earphones/headphones.
Takeda Immediately after joining the company, I was assigned to home audio, gaining over a decade of experience working with everything from individual components to mini-components before moving on to car audio. I was in charge of both consumer and automotive manufacturer products, so for a while I was constantly visiting multiple car companies. After that, I was in charge of some wireless equipment, then became a GUI manager, and after that I moved around to various roles such as communication design management. I think I've probably experienced almost every genre at KENWOOD.
A challenge to develop groundbreaking products
Today, I'd like to ask you both about the products you've worked on that hold the most special memories for you. Let's start with Mr. Takamoto.
Takamoto This is a product called "Drum Can" (RV series) that Victor released in 1993, which was marketed as "KABOOM" in the US and "BoomBlaster" in Europe. It was a completely new concept product that could produce a lot of deep bass for its time, and I remember that the moment I saw the technical sample at their former Maebashi office, this cylindrical design immediately came to mind. Normally, I would draw tons of sketches to consider the design, but this time I drew a full-scale rough sketch on two sheets of A1 tracing paper and immediately started drawing it in CAD.

By the way, what exactly is a technical sample?
Takamoto A mockup is for verifying the shape, while a technical sample is like a Proof of Concept (PoC) that actually produces sound to verify whether the product concept is expressed. When we went overseas for demonstrations, we made a mockup out of a large block of ABS resin, hollowed it out with machining, and put the technical sample inside. We had the product planners who attended overseas planning meetings carry the final mockup and actually produced sound to give presentations.
What kind of feedback did you receive after the product was launched?
Takamoto At the time, it was an exorbitant price for a boombox, costing over 3 yen. However, influenced by the hip-hop boom, many people in the North American market, our main target market, took out loans to buy it. In Europe, it also became a long-selling product, particularly in Germany.
In 80s American downtowns, there was a culture of carrying large boomboxes around town and dancing, and I designed the product while imagining that kind of usage and user profile. I remember being happy when I saw a man who looked like he was from the Yokosuka base walking around Yokohama Station with a skeleton model on his shoulder, realizing that it was reaching the people I had envisioned.
Not just with this product, but it always makes me happy to see someone touching my products on the shelves, and I would even go out of my way to visit the stores. When they didn't sell, though, I couldn't bring myself to go near the shelves... (laughs).
Another memorable product was the "HR-V10" VCR. At the time, my superior told me, "I want you to aim for a newer, unprecedented black," so we adopted a proposal from an aluminum processing manufacturer and aimed for a lacquer-like finish. We were absolutely committed to "jet black" throughout the entire product, and for parts that couldn't be painted, such as buttons and lids, we used a glossy, high-brightness ABS resin.

However, it had the drawback of being prone to scratches and dents due to the weakness of the paint film, resulting in many cosmetic defects. One day, a cardboard box arrived addressed to me from the department in charge of mechanical components, and it contained about 20 defective front panels... It's a product that remains in my memory, for better or for worse.
Were there many tense interactions with other departments like that back then?
Takamoto Back then, each business unit had a completely different culture, so there were times when we clashed depending on the situation, and other times when we worked together closely on product development. On the other hand, we often became closer, and above all, it was fun. At that time, technology was still in the process of innovation, so everyone was learning.
The Victor brand was characterized by its tradition and warmth, but at the same time, it was a company that wanted to create groundbreaking products. Although there were many products that didn't sell well and were failures, the fact that the brand continued to challenge itself is what makes Victor appealing, and I myself have always wanted to create products like that.
The texture and presence that express identity
Now, Mr. Takeda, could you please share a story about a product that holds special memories for you?
Takeda この"K's CORE-7000'This is the second generation of "K's," a high-fidelity component system that condenses high-fidelity sound quality into a compact size. We struggled with how to evolve the concept and appeal of the product we created with the first generation. As it was the top-of-the-line mini component system at the time, we were conscious of how to express the product's shadows, feel, and overall presence.
At the time, KENWOOD aimed to create long-lasting products based on the slogan "No model changes for three years." When designing not only K's products but all of our products, we were always conscious of how to express the three characteristics of KENWOOD products that continue to this day—"innovation, sharpness, and high quality"—through design. By being conscious of this, we were able to create the KENWOOD style and differentiate ourselves from other companies.

Takamoto The fact that they were creating such timeless designs was amazing for that time. KENWOOD products were characterized by their sharp and crisp designs, and they stood out as exceptionally cool among consumer products. They were Victor's biggest competitor, and our in-house engineers were studying their products by disassembling them, so I felt I couldn't be outdone.
Takeda Certainly, I think there was a very strong desire back then to "create something cutting-edge" and "create something different from other companies." Otherwise, we wouldn't have been able to compete with the other companies. At the same time, it was also an era where it was important to respond to the desire of users to "own something special." I thought Victor was a manufacturer with excellent technical capabilities as a long-established audio company, but they also had many innovative products, didn't they?
Then, the "HS-017M" was the first product I was in charge of after moving to the car audio design team. At that time, the younger generation was spending a lot of money on cars, and car audio was not just about practicality, but also had a strong aspect as a "hobby item" that allowed people to express themselves. I came up with the idea of making the crossover network (an electronic circuit that separates the audio signal into low and high frequencies and sends the appropriate signal) cylindrical and screwing it to the back of the speaker, and when I included it in the sketches, both the planner and the designers chose that design. Car speakers are hardly ever seen once they are installed, so they were very kind to allow a design that involved spending money on the back. I think it was quite challenging from a design perspective, but the engineers were also excited and proceeded with the development.

Another product that left a lasting impression on me was the "TK-2200/3200" radio. This was around the time when the unified concept for KENWOOD's current radio lineup had just been established, and I designed it with the goal of expressing this concept in the product. To make it fit comfortably in the hand, I narrowed the shape of the casing where you grip it, and my goal was to make "ease of holding" an iconic feature.

Just like the concept, the design of this product has been carried on as part of its product identity to this day. What kind of trial and error did you go through to its completion?
Takeda I drew several sketches, but at the review meeting, everyone in charge of planning and design said, "This one is good," so it was decided quite easily. This was the only radio I ever worked on, but I'm glad I was able to create such an iconic design.
How did you both feel when Victor and Kenwood, both companies in the same industry, merged to form JVC Kenwood?
Takeda It was a strange feeling. At first, I was so embarrassed to even see him at work that I walked around with my head down (laughs).
Takamoto There was a feeling that we couldn't casually mention each other's brand names. However, immediately after the merger, I became the manager of the radio equipment division at KENWOOD, so I couldn't afford to be picky anymore. I remember bracing myself for the fact that many of the old ways of doing things wouldn't work anymore.
I had never designed a radio before, but suddenly I was put in charge of a product that would become a symbol of KENWOOD, so I received a three-hour lecture on the design philosophy of KENWOOD radios at the time. I was able to listen carefully to what KENWOOD had built up over the years, as well as what kind of thinking went into creating the products, while looking at past products, and it was a valuable experience even now.
Design process before the introduction of 3D CAD
You've both experienced changes in the design process; are there any differences you notice between then and now?
Takeda In recent years, most of our production is done overseas, so it's difficult to be present at the factory, but in the past, we were able to visit the factories of our suppliers and discuss processing methods. When we did special aluminum processing for K's panels, we discussed it directly with the craftsmen at the factory, and for the curved processing of natural wood for the speakers, we received cooperation from a guitar manufacturer, and we visited their factory and learned a lot from them.
There are limits to what you can think about in your head, and I believe that the experience of actually seeing and touching things while discussing with the factory staff was a very important experience for me as a designer.
Takamoto When I joined the company, it was a transitional period when 2D CAD was just starting to be used company-wide, and there were still many senior employees who couldn't use CAD. Back then, product designers would draw sketches on tracing paper with an oil-based marker called "Speedly." They would use a drafting table tilted over like a desk, surrounded by reference magazines, with sample products piled up at their feet. When I saw the hand-drawn diagrams made by senior colleagues who couldn't use CAD, they were truly beautiful, and they looked like works of art in themselves. With CAD, you can make corrections as much as you want later, but my seniors would decide on the entire layout in their heads beforehand and draw it on the tracing paper with a pencil. I thought it was cool, and from time to time I would secretly pull out the diagrams and look at them.
In addition, the production department had skilled woodworkers who created mockups based on the designs drawn by the designers. We also had a paint booth so I could mix colors myself, and we had a phototypesetting machine and a tool called "Color Ease" made by Too that allowed us to produce in-house dry transfer decals. 3D CAD was introduced when I was a mid-level employee, and because the software was quite expensive, it was distributed preferentially to younger employees.


"mono"The work of a product designer that creates emotional value.
Today we've looked back at your careers as product designers, but what do you think are the appeal and strengths of Victor and KENWOOD as brands?
Takamoto Victor has developed user-friendly formats and hardware, like VHS, and I feel it's a brand that wants to have as many touchpoints with customers as possible through its entertainment and content businesses. I hope that JVC Kenwood, which shares that DNA, will also cherish the product design that inherits this mindset.
Takeda Victor is a brand that covers a wide range of areas, appealing to diverse customer segments.
While the KENWOOD brand may not cover as wide a range of areas as Victor, its strengths lie in its "specialization" in areas such as audio, communications, and automotive, as well as the "reliability" cultivated through the development of products that can withstand the harsh environments of professionals, including wireless equipment. I believe it is important to continue to express the strengths and characteristics of each brand in a "sharp" way, without compromising them, and I think it is very important to make the strengths of both the KENWOOD and Victor brands the strengths of JVC Kenwood.

Finally, what message would you like to convey to the next generation of designers who will be responsible for the future of the JVC Kenwood brand?
Takeda Since becoming involved in management, I've been careful not to impose the values of my generation too much. I believe that allowing designers to work freely allows them to showcase their individual strengths and achieve higher performance.
When we first joined the company, you needed an audio system to listen to music and a video camera to shoot videos, but now you can do everything with just a smartphone, so our values regarding things are completely different from before. Our sense of what's cool has also changed, and I think it will become increasingly important for product designers to consider the social context and think about what kind of impact the products they design will have on society.
I think the appeal of this job lies in the fact that you can move people's hearts with the things you create. It's one of the few professions where you can create things that feel good to the touch and are comfortable to use. Humans themselves are analog, so the emotional value of feeling comfortable to the touch or finding beauty in the eyes will never disappear, and I think it's something universal that transcends generations.
Takamoto We are a generation that has an emotional attachment to "things," and we place importance on finish and feel. Many product designers of our generation were fond of watches and lighters, and I think many of us felt a sense of attachment to the things we had in our possession.
I believe that experiences that can be felt by touch should not disappear, even if app design becomes the mainstream. As a product designer, I hope you will never lose sight of the importance of "tactile sensation," which is the final point of contact with the user.
Profile
- Masahiro Takamoto
-
- Senior Advisor
- Katsumi Takeda
-
- Senior Advisor
Join Us
JVCKENWOOD Design is looking for new employees to join our team. For more information, please see our recruitment information.